!#8# Frequently Asked Questions Tattoo Machine - Part Five: Tattoo Machine Parts

!±8± Frequently Asked Questions Tattoo Machine - Part Five: Tattoo Machine Parts

This is the last part of the common questions from tattoo machines, and this part I will discuss some questions, especially about the bill.

Question 1: Some tattoo machines have a very clear sound to work, while others have a sweet sound, what it has to do with the power and functionality of the machines?
Answer: the sound of the machines work is relevant to the thickness of the material from which the tattoo machine frame. Besides this, the thickness of the coil basesalso affects the sound working class.

Question 2: Under normal conditions, work in a long time, there is some substance produced at the point of contact point between the spring and the screw that will affect the current flow. How to solve this problem?
Answer: This is the phenomenon known as a carbon sink. You can buy the waterproof sandpaper hardware store and use it to rub something on the surface of the contact point. Do not paint anything,ESD protection.

Question 3: stainless steel suitable for the production of machine frames tattoo?
Answer: You did it! Stainless steel is the best material for the production of tattoo machine frame made of stainless steel because of its function, which are easy to clean the machines. However, the trend in stainless steel, would be to take no damage during the milling process, so most plants are made of stainless steel for the material that is the reason, the conventional wisdom that it is inappropriate to beselected.

Question 4: Is there a special requirement for reels?
Answer: No specific issues in the elections for the machine coils tattoo requested. The central point is to choose the right materials for the fusion coil, mild steel that should be better. To determine how many channels must be set, it really depends on the thickness of the wire. Now, no matter how many circuits you are doing, how soon after the normal cross-section.

Normally the circuits of the coil motors controlled by automaticwill be better than those made by hand, because the workforce is average, as opposed to hand-coil circuits.

All the frequently asked questions about tattoo machines have been found so far. I hope you will help to some extent. If you have additional questions and get answers, you are welcome to list in the comments below. Further information on tattoos will help you enjoy a safer and easier tattoo.